滑触线在使用过一段时间后肯定会出现一些预想不到的故障，及时发现及时处理是非常的重要，今天就要为大家讲讲滑触线在出现故障后应该如何处理。
The sliding contact line in use after a period of time there will be some unexpected failures, timely detection and timely treatment is very important today to the sliding contact line as we talk about how to deal with after a failure.
1、我们在使用滑触线的时候会出现火花，主要还是因为其表面和导体之间的接触不良原因导致的，我们可以检查接头，发现问题及时处理
1, when we use sliding touch wire will appear sparks, mainly because of its surface and conductor contact between bad reasons, we can check the joints, and found the problem in time processing
2、当电流过大的时候集电器设备的行走就会变得有问题，处理这样情况我们可以采用增加电器数量，调整连接导轨就可以了。
2, when the current is too large, the collector equipment will become a problem of walking, to deal with this situation, we can increase the number of electrical appliances, adjust the connection rail on it.
3、滑触线的表面的外壳会经常有裂开，主要还是因为其导体的变形所导致的，处理这样的情况我们可以增加提挂架的办法来解决。
3, the surface of the sliding contact surface will often crack, mainly because of the deformation of its conductor, and in dealing with this situation, we can increase the lifting rack method to solve.
4、要是出现断电的情况可能就是因为电刷的磨损很大而且也不能与导致所接触或者是直接松脱，处理这样的情况我们可以先检查其磨损情况，看看是否要更换新的，然后在检查连接点。
4, if appear the situation of power is possible because the brush wear big but not with the resulting contact or direct loose, dealing with such a situation we can first check the wear situation, whether to replace the new, then the connection point in check.
5、滑触线要是出现很大的晃动可能是因为拔叉无法吸收传动误差所导致的，解决办法就是，我们可以修正牵引器减少误差和调整导轨。
